RC Helicopter flying, RC Cars and RC boating

Made for other people and me to track what I am doing when with my remote controlled units. It started out with helicopters. Hence the name.

If only one of my units is of interest, this unit can be clicked on the right and only posts regarding that unit shows up.

This blog is open for comments so feel free to leave a comment.

Putting strips on Jenny

Aero-naut JennyPosted by xilsoe Dec 26, 2017 15:19:00
As I am not really a fan of the stained hull Jenny has, I decided to put some strips on the sides of the hull. I found some 10x0,5mm mahogany strips. This was the widest strips I could find that were still very slim. If I had found some wider strips I would have picked those instead. Further mahogany seems to be the only kind of wood offered in this very thin format. Otherwise I might have picked another kind of wood.

The hull already had been given some layers of lacquer, so I also gave the strips a layer of lacquer on both sides. Then I sanded the strips and the hull very gently. The strips were easily cut to length using a scissor. Finally I glued the strips to the sides of the hull using CyanoAcrylate. Very easy to get them to stick. Much easier than what I experienced building the Phantom. If I was to build the Phantom again, I would definitely put some layers of lacquer on the hull and mahogany strips before gluing them to the hull.

Now I have some sanding to do and I still have some gaps to fill in the hull before I proceed. I should probably put some more lacquer on the mahogany before trying to fill in the gaps so the glue won't mess with the mahogany. At some point I will make the mahogany bright and shiny as I did on the Phantom. Hopefully I know how to do it faster this time, but it will probably take at least 10 layers of lacquer before I am done.

Some pictures:
Thanks for looking smiley

  • Comments(0)//heliblog.moller-ilsoe.dk/#post515