heliblog

heliblog

RC Helicopter flying, RC Cars and RC boating

Made for other people and me to track what I am doing when with my remote controlled units. It started out with helicopters. Hence the name.

If only one of my units is of interest, this unit can be clicked on the right and only posts regarding that unit shows up.

This blog is open for comments so feel free to leave a comment.

Tightening the Bruiser slipper clutch

Tamiya BruiserPosted by xilsoe Jul 29, 2017 12:54:29
Last week I found the time to take the gearbox out of the Bruiser so the slipper clutch could be tightened. Not so much to taking the gearbox out. It seems to be designed for easy removal. I did have to cut some cable ties I had added so the cables wouldn't be all over.

When doing this kind of thing it is always nice to have the manual at hand. This will show how things comes apart and goes back together. One frightening thing I found when I had taken the gearbox apart was that a shim and a bearing was missing.

Apparently I had assembled the gearbox wrong when I put the slipper clutch in. The Bruiser had been running fine even without the missing parts, but now i have put them in as I believe it is better to have the gearbox assembled correctly.

I haven't tried the Bruiser out in terrain yet so I don't know if I am content with this adjustment. The test run indoor does however show that there is much less slip in the slipper clutch now. So this operation was definitely an improvement.

smiley

  • Comments(0)

Fill in only if you are not real





The following XHTML tags are allowed: <b>, <br/>, <em>, <i>, <strong>, <u>. CSS styles and Javascript are not permitted.